1.Put the maker into a depth of water in 50-60mm steadily.The best water level is 20-30mm covering the sensor switch.
2.Connected the mist maker and correctly.
3.Surprise mist maker can stop working automatically when the water level up to the suitable stand.
4.At the beginning the spraying maybe weak, after a while, It becomes steady.It may be affected by cold weather.so pour in some warm water will help.
5.Please check input voltage which shows on the transformer whether fit the local voltage or not before you use our products
6.if does not use the mist maker for a long time, please switch off the powerless accident happen.
1.please make sure you put enough water in the container, although we adopt protective design when it absent of water, The mist maker will stop working automatically by the sensor switch when the water is not enough, less than it burns out.
2.Pay attention to protecting the integrality of water sensor switch, don't carry or draw by hand or impact on any other objects 3.Donot place the unit near electrical equipment such as television to avoid fog damping the equipment
4.Kipping the water clean always .if there is some dirt on the water.clean it with a soft cloth. don't use chemical liquid to wash it too.
5.When the mist maker is working normally, please don't put your fingers on the ceramics disc,or you will get a tingle feeling with the ultrasound.