The products belong to the company's independent research and development and manufacturing, and the production process is controlled by layers. It can be customized according to the needs of users. Various types and models are available. At the same time, the company's location is in a convenient location. People from all walks of life are welcome to visit and guide!
The ultrasonic transducer is mainly composed of an aluminum alloy front cover, a 45 steel back cover, a piezoelectric ceramic chip, a pre-force screw, an electrode sheet and an insulating sleeve:
One: aluminum alloy front cover The front pressure block of our company adopts LY12 alloy aluminum.
Advantages: Ultrasonic transmission speed, low impedance and high conversion efficiency.
Two: 45 steel back cover Our company uses 45 copper, nickel plated and then plated with decorative chrome.
Advantages: It meets the anti-rust and anti-corrosion standards of metal surfaces; the plating process is bright and the appearance is bright.
Three: Piezoelectric ceramic wafers Our company uses Taiwan P43 materials,
(1) stable performance;
(2) The sensitivity to temperature is relatively small (water temperature rises, Ct.fs changes little);
(3) The Qm value is relatively high;
(4) The calorific value is relatively low;
(5) High power conversion efficiency;
Four: Pre-force screw Our company adopts the national standard 12.9 high-strength screw.
Advantages: Ensure that the vibrator does not loosen or break under high frequency vibration.
Five: Electrode sheet Our company uses lead-free solder wire coated with beryllium bronze.
Advantages: good electrical conductivity.
Six: 100% full inspection
Advantages: 2818 instrument detection, 2500V insulation resistance test.